DEscriptION

26AV-10 is an air drying single component epoxy coating

formulated to provide excellent fluid resistance and corrosion

protection. This product has the same resin system as the

original Sandstrom 26A Solid Film Lubricant, a material which

obtained a proven track record through decades of industrial

and military applications around the world.

TYPICAL USES

Sandstrom 26AV-10 can be applied to all metallic and non-

metallic surfaces by spray or dip application wherever parts

require corrosion protection and fluid resistance. Sandstrom

26AV-10 has found use in the electronics industry as a

protective coating in circuit board applications.

COMPOSITION AND PHYSICAL PROPERTIES

Net Weight (Uncut) 7.2 + .25 lbs./gallon

Non Volatiles 10.00 - 14.00% by weight

(theoretical)

Viscosity #1 Zahn cup @ 770

F

30 - 40 seconds #1 Zahn

Flash Point 23F

Operating Temperature Range -3200

F - +3000

F

Vehicle Type Epoxy

Color Clear and Black

custom colors available

Shelf Life 1 year from date of shipment

Storage Conditions 400

F to 1000

F

Dry Film Thickness .0003" to .0007" DFT recom-

mended. Use this as a guideline

to determine the optimum DFT for

your specific application.

Corrosion Protection OVER PLAIN STEEL

168+ Hours

OVER MANGANESE PHOSPHATE

400+ Hours

(5% Salt Spray @ .0005" DFT)

Fluid Resistance Resistant to following fluids

MIL-PRF-46147 Table 1 Immersion Fluids

ASTM D1193

MIL-PRF-372

MIL-DTL-83133 JP8

MIL-PRF-63460

MIL-PRF-14107

VV-D-1078

Method of Application Conventional spray or dipping

Thinner Spraying: Use as received. If necessary to

thin, reduce sparingly with Thinner Blend

(MEK and PM blended 1:1)

Dipping: Use as received.

Clean Up Use same solvents for cleaning

tools as are recommended for

thinning.

Odor Strong Solvent