 |
   |
产品详情
Sandstrom #099 Dry Film Lubricant is a paint-like coating
containing molybdenum disulfide and corrosion inhibiting
pigments. This Heat Curing material prevents corrosion,
galling, seizing, and fretting. It is a low-friction coating which
exhibits long wear life when operated at -3200F to +5000F
under loads exceeding 100,000 psi.
#099 should be applied where maximum wear life and
corrosion protection from a dry film lubricant are required.
Once Sandstrom #099 has been heat cured, it is virtually
unaffected by atmospheric and fretting corrosion, solvents,
acids, oils, degreasers, and is not resoftened again at
elevated temperatures.
#099 can be applied to a wide variety of surfaces by spraying
or dipping. Complete application instructions are on the
reverse of this sheet.
OUTSTANDING BENEFITS
Excellent Corrosion Protection, Chemical Resistance, and
Long Wear Life are its outstanding characteristics. Cured
product exceeds the screening requirements for use in
spacecraft materials.
TYPICAL USES
Sandstrom #099 is an excellent solution to the problem of
lubricating parts:
• That will be operated in corrosive atmospheres
• That may be stored for long periods
• Which are seldom lubricated once they leave the factory and
where permanent lubrication is desired
• Where operating pressures exceed the load-bearing capacities
of ordinary oils and greases
• Where parts may be subjected to frequent disassembly
• Where "clean operation" is desired (#099 will not collect dirt and
debris like grease and oils)
• Where a protective coating and sacrificial break-in lubricant is
needed
• Where fretting and galling is a problem (such as splines,
universal joints, and keyed bearings)
• Where easy release is desired (such as fasteners and PVC
molds)
您可能想要查看
更多
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责。工程机械产业网对此不承担任何责任。
友情提示：为规避购买风险，建议您在购买相关产品前务必确认供应商资质及产品质量。
